Have you ever made a beaded bracelet? They are so much fun to make! I sat down to make a few recently after not making any for a couple of years and realized just how addicted I could get to making these things again. They make a perfect gift and are inexpensive to make once you have the basic tools. So, if you haven’t done it before, let me show you how to make beaded bracelet:
You can make them in any color and any style!
And, I’ve got some blogging friends who will teach you to make other types of jewelry as well and then we’ve got a giveaway at the bottom of this post as well!
Be sure to check out all of the amazing tutorials for these jewelry pieces on these fabulous blogs: Flamingo Toes, Bombshell Bling, eat.sleep.MAKE., Crazy Little Projects, and The Scrap Shoppe.
How to Make a Beaded Bracelet:
- Beads-go to the craft store and get beads in a variety of sizes. You will want some small, some larger, different colors and types. Just mix and match.
- Tools: Crimper and Wire Cutters
You should be able to get all of those supplies at your local craft store in the jewelry section, or you can order online.
Cut a piece of your jewelry wire several inches longer than you will need the bracelet to be. (So about 9 or 10 inches long.)
Slide a crimp bead onto one end of the wire:
Now, to crimp the bead, grab your crimper. You will see that it has two parts. One part of it, the lower part, will look like a C shape, the upper one more like an O. First, hold it over your crimp bead, right where you want it (see image above for help with placement), and crimp it into a C shape. Then use the O shape part to round it out into a nice circle. In the image below I am showing you step 2-crimping it the second time, to make it an O shape:
Your crimp bead should be nice and snug now. Get one of your crimp covers, place it over your crimp bead and squeeze the O shape part of the crimper on it to squeeze it shut over the crimp bead.
Now, start stringing your beads. Have fun with this and get creative. Anything goes. You can create a pattern or go random, whatever you want.
A couple of tips
- Start with a couple of small beads if you are using a toggle closure so that they can slide through it a little.
- For sizing, generally you will measure the wrist and go up about 1/2 inch if you are using all small beads, about 1 inch if you are using large beads.
- Typical women’s sizes are around a 7 inch bracelet give or take.
- The wire will stretch a little overtime so err on the side of smaller rather than larger.
- String the first few beads through the small strand of wire you have left hanging from your crimp bead and then snip it off:
String until you have the bracelet the length you want it and then do the exact same thing to this end that you did at the beginning with the crimp bead and toggle. It takes a little practice to get the hang of crimping and things, but once you get going you are going to want to make bracelets for everyone you know!